LED Display & System Status Overview
7 Segment Blue LED - Single 1.5 Inch (38.1mm) Anode 7 Segment LED - Super Bright Blue: 70,000 ucd Single digit led numeric display. Color: InGaN Super Blue (465nm). Black color background. Luminous Intensity per Segment: 70,000 ucd. Viewing Angle: +/- 50 Degrees. Right Hand Decimal Point. Custom configurations also. Jameco sells 1.5v led and more with a lifetime guarantee and same day shipping. Browse our Computer Products, Electronic Components, Electronic Kits & Projects,.
LED | Color | LED Status | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
System Status | Red/Green | Flashes green and red alternately every 0.5 sec |
| ||||||||||
Red |
| ||||||||||||
Flashes red every 0.5 sec | The NAS is in degraded mode (one member hard drive fails in RAID 1, RAID 5 or RAID 6 configuration). | ||||||||||||
Flashes green every 0.5 sec |
| ||||||||||||
Flashes green every 2 sec | The NAS is in S3 Sleep Mode1. | ||||||||||||
Green | The NAS is ready. | ||||||||||||
Off | All the hard disk drives on the NAS are in standby mode. | ||||||||||||
Power1 | Green | Flashes green | The NAS is booting up. | ||||||||||
Green | The NAS is on and ready. | ||||||||||||
LAN | Orange | Orange | Gtasks pro 1 3 6 – tasks for google maps. The disk data is being accessed from the network. | ||||||||||
Flashes orange | The NAS is connected to the network. | ||||||||||||
10 GbE* | Green | Green | The 10GbE network expansion card is installed. | ||||||||||
Off | No 10GbE network expansion card is installed. | ||||||||||||
HDD | Red/Green | Red | A hard drive read/write error occurs. | ||||||||||
Flashes green | The disk data is being accessed. | ||||||||||||
Green | The hard drive can be accessed. | ||||||||||||
USB | Blue | Flashes blue every 0.5 sec |
| ||||||||||
Blue | A front USB device is detected (after the device is mounted). | ||||||||||||
Off |
| ||||||||||||
eSATA** | Orange | Flashes | The eSATA device is being accessed. | ||||||||||
Off | No eSATA device can be detected. |
*The 10 GbE network expansion function is only supported by the TS-470 Pro, TS-670 Pro, TS-870 Pro, TS-870U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1270U-RP, TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.
**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support eSATA port.
1This feature is only supported by certain NAS models. Please visit http://www.qnap.com for details.
Alarm Buzzer
The alarm buzzer can be disabled in 'Control Panel' > 'System Settings' > 'Hardware' > 'Buzzer'.
Beep sound | No. of Times | Description | ||||
Short beep (0.5 sec) | 1 |
| ||||
Short beep (0.5 sec) | 3 | The NAS data cannot be copied to the external storage device from the front USB port. | ||||
Short beep (0.5 sec), long beep (1.5 sec) | 3, every 5 min | The system fan is out of function (TS-119 does not support smart fan). | ||||
Long beep (1.5 sec) | 2 |
| ||||
1 |
|
url http://www.yourdomain.com/help/index.html?checking_system_status.htm
Network Led 1 5 X 4
© 2015 QNAP Systems, Inc. All Rights Reserved. |
LED Display & System Status Overview
LED | Color | LED Status | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
System Status | Red/Green | Flashes green and red alternately every 0.5 sec |
| ||||||||||
Red |
| ||||||||||||
Flashes red every 0.5 sec | The NAS is in degraded mode (one member hard drive fails in RAID 1, RAID 5 or RAID 6 configuration). | ||||||||||||
Flashes green every 0.5 sec |
| ||||||||||||
Flashes green every 2 sec | The NAS is in S3 Sleep Mode1. | ||||||||||||
Green | The NAS is ready. | ||||||||||||
Off | All the hard disk drives on the NAS are in standby mode. | ||||||||||||
Power1 | Green | Flashes green | The NAS is booting up. | ||||||||||
Green | The NAS is on and ready. | ||||||||||||
LAN | Orange | Orange | The disk data is being accessed from the network. | ||||||||||
Flashes orange | The NAS is connected to the network. | ||||||||||||
10 GbE* | Green | Green | The 10GbE network expansion card is installed. | ||||||||||
Off | No 10GbE network expansion card is installed. | ||||||||||||
HDD | Red/Green | Red | A hard drive read/write error occurs. | ||||||||||
Flashes green | The disk data is being accessed. | ||||||||||||
Green | The hard drive can be accessed. | ||||||||||||
USB | Blue | Flashes blue every 0.5 sec |
| ||||||||||
Blue | A front USB device is detected (after the device is mounted). | ||||||||||||
Off |
| ||||||||||||
eSATA** | Orange | Flashes | The eSATA device is being accessed. | ||||||||||
Off | No eSATA device can be detected. |
*The 10 GbE network expansion function is only supported by the TS-470 Pro, TS-670 Pro, TS-870 Pro, TS-870U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1270U-RP, TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.
**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support eSATA port.
1This feature is only supported by certain NAS models. Please visit http://www.qnap.com for details.
Alarm Buzzer
The alarm buzzer can be disabled in 'Control Panel' > 'System Settings' > 'Hardware' > 'Buzzer'.
Beep sound | No. of Times | Description | ||||
Short beep (0.5 sec) | 1 |
| ||||
Short beep (0.5 sec) | 3 | The NAS data cannot be copied to the external storage device from the front USB port. | ||||
Short beep (0.5 sec), long beep (1.5 sec) | 3, every 5 min | The system fan is out of function (TS-119 does not support smart fan). | ||||
Long beep (1.5 sec) | 2 |
| ||||
1 |
|
Network Led 1 5 Led
url http://www.yourdomain.com/help/index.html?checking_system_status.htm
Network Led 1 50
© 2015 QNAP Systems, Inc. All Rights Reserved. |